Stainless Steel 316 Pipe Fittings
SS 316 Buttweld Fittings and ASTM A403 WP316 Elbow manufacturer in India.
Stainless Steel 316 Pipe Fittings
ASTM A403 WP316 Buttweld Pipe Fittings
SS 316 Pipe Fittings Price List (Elbow, Tee, Reducer)
Table of contents
- What Is A403 316?
- Stainless Steel 316 Pipe Fittings Used Austenitic Steel?
- What Is Use Of ASTM A403 WP316 Elbow In Piping?
- 316 Stainless Steel Pipe Fittings Equivalent Length
- ASTM A403 WP316 Chemical Composition
- A403 WP316 Mechanical Properties
- SA-403 316 Physical Properties
- A403 316 Specification Format
- Different Between A403 WP 316 & A403 WP304L
- ASTM A403 WP316 Buttweld Pipe Fittings Dimensions
- SS 316 Fittings Maximum Weight
- Stainless Steel 316 Fittings Pressure Rating Table
- Tolerance Formula Of ASTM A403 WP316 Pipe Fittings
- ASME SA403 Gr WP316 Ring Gasket Chart
- Check Availability Types Of ASTM A403 WP316 Fittings
ASTM A403 WP316 Elbow
Stainless Steel 316 Tee
UNS S31600 Reducer
What Is A403 316?
ASTM A403 WP316 Fittings are a grade of pipe fittings that are made up of a high oxidation resistant material. This material is also corrosion resistive, pitting resistive and can withstand strong chemicals and acids. The high temperature and pressure tolerance of this material makes the A403 WP316 Elbow to perform better under the corrosive high pressure curvatures of piping. The corrosion in fluid direction changing joints is high. Due to the impact of the fluid flow, the fitting might break if there was corrosion and or thermal expansion.
Stainless Steel 316 Pipe Fittings Used Austenitic Steel?
The Stainless Steel 316 Pipe Fittings is one of the most used form of the austenitic steel in the piping world. ASTM A403 Wp316 Buttweld Pipe Fittings has slightly less corrosion resistant properties than the A403 WP316 Tee. But both could be used interchangeably in most conditions except where the requirement mandated one over the other. The 316 Pipe Fittings come in different shapes and standards. They could either be seamless or buttwelded. The SS 316 Fittings are much stronger due to the reason that they are heat treated after buttweldiing and can last longer than most other Stainless Steel 316 Tee.
What Is Use Of ASTM A403 WP316 Elbow In Piping?
ASTM A403 WP316 Elbow is used mostly in the domestic applications. The SS 316 Pipe Fittings could be used in commercial and industrial applications. Where the strength is more important than the corrosion resistance, the A403 Grade WP316 Buttweld 45 Deg Elbow could be used. The strength of the Stainless Steel 316 Elbow could be increased through cold working. The SS 316 Fitting can exhibit high strength, durability and weldability. Where, the cost is the major concern, the 316 SS Weld 90 Deg Elbow provide considerable cost cutting over high end alloy materials.
UNS S30400 Elbow
Werkstoff No. 1.4301 End Cap
SS 304 Pipe Reducer
316 Stainless Steel Pipe Fittings Equivalent Length
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Stainless Steel 316 Pipe Fittings | 1.4401 / 1.4436 | S31600 | SUS 316 | 316S31 / 316S33 | – | Z7CND17‐11‐02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
ASTM A403 WP316 Chemical Composition
% | Stainless Steel 316 Pipe Fittings |
C | 0.0-0.07 |
Mn | 0.0-2.0 |
Si | 0.0-1.0 |
P | 0.0-0.05 |
S | 0.0-0.02 |
Cr | 16.50-18.50 |
Mo | 2.00-2.50 |
Ni | 10.00-13.00 |
Ti | - |
Fe | balance |
A403 WP316 Mechanical Properties
Grade | Tensile Str (MPa) minimum |
Yield Str 0.2% Proof (MPa) minimum |
Elong (% in 50mm) minimum |
Hardness | |
Rockwell B (HR B) maximum | Brinell (HB) maximum | ||||
Stainless Steel 316 Pipe Fittings | 515 | 205 | 40 | 95 | 217 |
SA-403 316 Physical Properties
Grade |
Density (kg/m3) |
Elastic Modulus (GPa) |
Mean Co-eff of Thermal Expansion (µm/m/°C) |
Thermal Conductivity (W/m.K) |
Specific Heat 0-100°C (J/kg.K) |
Elec Resistivity (nΩ.m) |
|||
0-100°C | 0-315°C | 0-538°C | At 100°C | At 500°C | |||||
Stainless Steel 316 Pipe Fittings | 8000 | 193 | 15.9 | 16.2 | 17.5 | 16.3 | 21.5 | 500 | 740 |
ASTM A403 WP316 Buttweld Pipe Fittings Equivalent, UNS S31600 End Cap/ Tee Chemical Composition and Price List ex Mumbai.
A403 316 Specification Format
Specification: | Stainless Steel 316 Pipe Fittings |
Size: | Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48” |
Type: | Butt Weld (BW), Seamless (SMLS) Welded |
Thickness: | Sch 5S, 20S, S10, S20, S30, 10S, S80, S100, S120, STD, 40S, S40, S60, XS, 80S, S140, S160, XXS and etc. |
Type Of Dimension: | BS1640 Fittings, EN 10253 - 4 Fittings, DIN 2605 Fittings, JIS B2312 Fittings, ANSI B16.9 Fittings, MSS SP-75 Fittings, ANSI B16.28 Fittings, MSS-SP-43 Type A Fittings, MSS-SP-43 Type B Fittings, JIS B2313 Fittings |
Standard | EN, ISO, DIN, JIS, NPT |
Type | Elbow, Stub End, Bend, Tee, Reducer, Cap, Adapter, Wye, Cross, |
Connection Type | Threaded/ Clamp End / End Bell / Weld/ Flange/ |
Pressure-Temperature Class | 150LB, 300LB, 600LB, 1500LB, 2500LB. |
Schedule: | Schedule 5 TO Schedule XXS. |
316 Stainless Steel Pipe Fittings Weight Chart According to ASME B16.9 And Werkstoff Nr. 1.4401 Equal Tee Pressure Rating Calculator.
Different Between A403 WP 316 & A403 WP304L
- ASTM A403 WP316 Fittings are a grade of pipe fittings that are made up of a high oxidation resistant material. This material is also corrosion resistive, pitting resistive and can withstand strong chemicals and acids.
- ASTM A403 WP304L Fittings are pipe fittings made for austenitic stainless steel applications with forged material. These are commonly used for pressure piping that could withstand high pressure stress condition.
ASTM A403 WP316 Buttweld Pipe Fittings Dimensions
NPS | O.D. | 90 Degree Elbow | 45 Degree Elbow | 180 Degree Return | ||||
---|---|---|---|---|---|---|---|---|
(inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
(millimeter) | (inch) | Center to Face (inch) |
Center to Face (inch) |
Center to Face (inch) |
Radius (inch) |
Center to Center (inch) |
Back to face (inch) |
|
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
NPS | O.D. | Pipe End Caps | Straight Tee | Straight Cross | Long / Short Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(inch.) | (millimeter) | (inch.) | Length (inch.) |
Center to End (inch.) |
Center to End (inch.) |
Lap Diameter (inch.) |
Long Length (inch.) |
Short Length (inch.) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
SS 316 Fittings Maximum Weight
Stainless Steel 316 Fittings Pressure Rating Table
Pressure-Temperature ratings for Stainless Steel 316 Pipe Fittings (psig) | |||||
---|---|---|---|---|---|
Temperature Ratings | Pressure Class | ||||
150 | 300 | ||||
1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
EIL Approved Stainless Steel 316 Buttweld Fittings Manufacturer In India And BS 316S31 Long Stub End Thickness Chart.
Tolerance Formula Of ASTM A403 WP316 Pipe Fittings
ASME B16.9 Fittings Tolerance | 90 Degree & 45 Degree Elbows & Tees |
Reducers & Lap Joint Stub End |
Pipe Caps | |||
ASME B16.9 Buttweld Fitting (Normal Pipe Size) | O. D. at Bevel |
I. D. at End |
Wall Thick. T | Center-to-End Dimension A ,C ,B |
Over-all Length H |
Over-all Length F |
1/2 to 2-1/2 | +0.06 | Not less than 87.5% of nominal thickness |
+/- 0.06 | +/- 0.06 | +/- 0.12 | |
-0.03 | ||||||
3 to 3-1/2 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
4 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.12 | |
5 to 8 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.06 | +/- 0.25 | |
10 to 18 | +0.16 | +/- 0.12 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
-0.12 | ||||||
20 to 24 | +0.25 | +/- 0.19 | +/- 0.09 | +/- 0.09 | +/- 0.25 | |
-0.19 | ||||||
26 to 30 | +0.25 | +/- 0.19 | +/- 0.12 | +/- 0.19 | +/- 0.38 | |
-0.19 | ||||||
32 to 48 | +0.25 | +/- 0.19 | +/- 0.19 | +/- 0.19 | +/- 0.38 | |
-0.19 |
Global Supplier Of ASTM A403 Stainless Steel 316 Fittings And SA403 WP316 Mechanical Properties Data Sheet.
ASME SA403 Gr WP316 Ring Gasket Chart
NPS | Gasket I.D. |
Gasket O.D. | ||||
---|---|---|---|---|---|---|
Class 150 | Class 300 | Class 400 | Class 600 | Class 900 | ||
1/2 | 0.84 | 1.875 | 2.125 | 2.125 | 2.125 | 2.50 |
3/4 | 1.06 | 2.25 | 2.625 | 2.625 | 2.625 | 2.75 |
1 | 1.31 | 2.625 | 2.875 | 2.875 | 2.875 | 3.125 |
1 1/4 | 1.66 | 3 | 3.25 | 3.25 | 3.25 | 3.50 |
1 1/2 | 1.91 | 3.375 | 3.75 | 3.75 | 3.75 | 3.875 |
2 | 2.38 | 4.125 | 4.375 | 4.375 | 4.375 | 5.625 |
2 1/2 | 2.88 | 4.875 | 5.125 | 5.125 | 5.125 | 6.50 |
3 | 3.50 | 5.375 | 5.875 | 5.875 | 5.875 | 6.625 |
4 | 4.50 | 6.875 | 7.125 | 7.00 | 7.625 | 8.125 |
5 | 5.56 | 7.75 | 8.50 | 8.375 | 9.50 | 9.75 |
6 | 6.62 | 8.75 | 9.875 | 9.75 | 10.50 | 11.375 |
8 | 8.62 | 11 | 12.125 | 12.00 | 12.625 | 14.125 |
10 | 10.75 | 13.375 | 14.25 | 14.125 | 15.75 | 17.125 |
12 | 12.75 | 16.125 | 16.625 | 16.50 | 18.00 | 19.625 |
Check Availability Types Of ASTM A403 WP316 Fittings
UNS S30400 End Cap
WERKSTOFF NR. 1.4301 Pipe Bend
Stainless Steel 304 Weld End Cap
JIS SUS 304 Lateral Tee
ASTM A403 WP304 Elbow
Stainless Steel 304 Unequal Tee
ASTM A403 Gr WP304 Cross
A403 Gr Wp304 WX Long Radius Elbow
Stainless Steel 304 Pipe Reducer
BS 304S31 U Bend
GOST 08Х18Н10 Tee
AFNOR Z7CN18‐09 Long Stub End
EN X5CrNi18-10 Concentric Reducer
Stainless Steel 304 Short Radius Elbow
SS 304 Short Stub End
SS 304 Long Stub Ends
We Supplied A Comprehensive Range Of Stainless Steel 316 Pipe Fittings To The Following Locations
AWWA C208, DN1400×1400, Stainless Steel 316 Fittings | United Arab Emirates (UAE), Norway, Malaysia, Turkey |
Schedule 10S, ASME B16.9, 8 Inch, SA403 WP316 Elbow | Dammam -KSA, Indonesia, Belgium, Philippines. |
Schedule 80, ASTM A403, 3 X 2 Inch, UNS S31600 BW Fittings | Canada, Singapore, Malaysia, Philippines |
ASME B16.9, 10 Inch, SCH 20S, ASTM A403 WP316 Fittings | Japan, Europe, Romania, Malaysia |
MSS SP-43, 6 Inch, SCH 40S, A403 WP316 Tee | Colombia, Malaysia, Sweden, China |
SMLS, Beveled End, 16 Inch, SCH 70S, SS 316 Fittings | Dubai, Netherlands, Russia, Malaysia |
SCH 100S, 1 1/2 Inch, RF, 316 Stainless Steel Fittings | South Africa, Saudi Arabia (KSA), Kuwait, Brazil |
16 Inch, Buttweld, SCH 30S,WNR 1.4436 Reducing Tee | Philippines, Nigeria, Australia, UK |
SCH40, 14 Inch, Seamless, Stainless Steel 316 Buttweld Fittings | Oman, Malaysia, Hong Kong, UAE |
Beveled End, 2 Inch, SCH 90S, 316 SS Pipe Elbow | South Africa, Bahrain, Singapore |
6 x 4 Inch, BW, ASME B16.9, Stainless Steel 316 Seamless Fittings | France, Thailand, Europe, Qatar |
ANSI B16.9 BW, 8 x 4 Inch, SCH 100, ASTM A403 Gr WP316 Elbow | Germany, Czechia, Malaysia, Thailand |
SCH 40, 8 × 4 Inch, BW, SA 403 WP316 Fittings | Finland, Malaysia, USA, Bangladesh |
SCH 40, 3 Inch, ASTM 403 Wp 316 Pipe Welded Fittings | Italy, Iran, Chile, Singapore |
SCH 40, BW, 6 × 3 Inch, ASME B16.9, SS Grade 316 Fittings | Egypt, Spain, UK, Mexico |
1/2 inch, SMLS, SCH5, ASTM A403 316 Seamless Pipe Fittings | Ellington -United States, Poland, Canada, UK |
4 Inch, buttweld, 316 SS Pipe Cap | United Kingdom -UK, Europe, UAE, Malaysia |